Support Forum

how to adjust idle on 2009 YZF R6 with FT ECU software

joshjahr1957@outlook.comjoshjahr1957@outlook.com Posts: 2Verified User
in R6

I have tried to play with cells in RPM ranges on Throttle by Wire ETV Base MAP, Warmup/Base Idle MAP. I was able to get idle up higher at the end of warmup cycle by adding more to all cells from 86 to 157 on warmup/idle map but after it warms up it just goes back to stock idle. I did try to play with SAP comp idle cells as well with those adjustments but that did nothing.

Can someone possibly point me in the right direction, Maybe some reading material. I do not expect to be spoon fed but I also would like to not screw up my bike.

Thanks, YamiR6Man

Comments

  • joshjahr1957@outlook.comjoshjahr1957@outlook.com Posts: 2Verified User
    edited July 19

    I was able to figure this out but it was by accident. I am supposed to be using the 60 Generic MAP but this would cause my idle to hang at 4k if I even touched the throttle. So for a good period of time I just used the 20 US MAP which worked fine but is missing features for my 2009 R6. I was able to fix the hang at 4k and choose where I want my idle to be, with the correct MAP.

    From my findings the hang is fixed by making changes in the same MAP that would be used to adjust the idle as well.

Sign In or Register to comment.