Support Forum

2020 Yamaha R6 EDR Velocity Stacks

aaronwhitt18@hotmail.comaaronwhitt18@hotmail.com Posts: 5Verified User
in R6

Hello,

I have a 2020 R6 with Arrow full exhaust, DNA air filter & EDR Performance velocity stacks. I am going to use the unrestricted map with active tune, but was wondering if there are any specific changes I would need to make on AFR to compensate for the stacks? My main concern would be for the bike to run more lean with them.

I also noticed on the Graves map that the RPM range is different for the velocity stacks than the unrestricted map and if I should change the RPM range as well?

Thanks!

Tagged:

Comments

  • octavio@ftecu.comoctavio@ftecu.com Posts: 191Staff User

    Hi,

    If you are using the Active Tune system with the Unrestricted Map you should be good. Make sure to go on a test ride as you would normally ride or run it on the dyno and save the corrections the Active Tune system made as a base map. You can set the target AFR in Active Tune to be a little more lean or rich depending on what you are aiming for. With a closer base map the system will not have to make as many corrections and be more efficient.

    Regards

  • aaronwhitt18@hotmail.comaaronwhitt18@hotmail.com Posts: 5Verified User

    Great, thank you for your help!

Sign In or Register to comment.