English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
Swedish
mail_paulkp@yahoo.com
mail_paulkp@yahoo.com
About
- Username
- mail_paulkp@yahoo.com
- Joined
- Visits
- 132
- Last Active
- Roles
- Verified User
- Posts
- 40
Comments
-
I am using FT Auto blip on tis bike with EU R6 Harness connected to pin12 of the smaller ecu connector , I did test with the auto blip disconnected and the original wire back in that position, but it made no difference to the misfire after starting
-
Thank you, I was making adjustments to the same ECU and it locked again... Please reset it 11F02E11 I seem to be having issues with this ecu after introducing the auto blip with sn 70B1F8E2 Please check that there is not a problem there with, I have…
-
I was attempting to add auto blip sn 70B1F8E2 to this ecu which was originally flashed in July of 2017 with licence11F02E11 . HOWEVER THE INTERNET SERVICE AT THE CUSTOMERS LOCATION WAS SO POOR THAT THE PROCESS FAILED, LOCKING THE TWO LICENSES
-
Hi Jason, checking if you have been able to find anything more with the quick shifter for this customers XSR900; Using bike side harness type 11 with a QS harness type 7 on a EU Version of 2016 XSR900. B90-8591A-00
-
Hi, in trying to fix the QS issue on this bike I tried to force a full re-write via the bike side harness, but unfortunately have locked this licence again :-( Please would you re-set it for me CE2C1C7C Thanks
-
Hi Please would you reset the license for this bike as I had an error during flash procedure, licence number CE2C1C7C Thanks
-
Hi, in trying to fix the QS issue on this bike I tried to force a full re-write via the bike side harness, but unfortunately have locked this licence again :-( Please would you re-set it for me CE2C1C7C Thanks
-
Hi Jason, The crucks of email sent yesterday. in reply to your mail. When doing the test with the MX kill switch I was not close to full throttle, as was only at approximately 4500 rpm. Checked the QS Harness and yes Blue wire is in position E and t…
-
Hi . I have not received your reply
-
Hi Jason, I have emailed you the results from the test file.
-
Thanks Jason, able to flash that ecu with its original licence again.. but still struggling with the quick shifter on that bike, have updated record regarding shifter with details
-
I have purchased a shift sensor from my local Dyno Jet distributor and am satisfied that the circuit id being closed with an appropriate amount of force being applied to the shift lever and selector rod. However when testing still no QS function. :-…
-
Hi Thank you Jason, was able to re-write the ecu successfully, and will test the bike in the morning
-
Hi, I am in Johannesburg, South Africa. Bikes by Paul PTY ltd 24 Walden Lane, Alan Manor Johannesburg 2091
-
That's correct Jason. The switch is closing after the pressure applied to the gear lever has rotated the shift drum.
-
https://forum.ftecu.com/uploads/684/RSZ8AME1QW3R.jpg As you will see I have adjusted link rod and shift arm to get as close to 90' as possible between the sensor and shift arm.
-
All working great , the owner of the bike is very happy. Thanks to all who assisted.
-
Selected yes on license overwrite and was able to re-apply the reset license successfully. will test the ecu on the bike shortly
-
Mike from Velox was working with someone from FT on Wednesday to try reset the licenses for this ecu, Around 2am (GMT +2) he sent me a message "Need to restart tuning suite mate to try that licence again" I have done that but no luck. licence infor…
-
Hi, Still having the same errors https://forum.ftecu.com/uploads/398/SW2SVXL1GEYE.png
-
https://forum.ftecu.com/uploads/016/WHIEBXAF6XVV.png
-
Hi Jason, I will bounce that off some of the customers, to see which one will make their ecu available, do you have an estimate of how long you would need the ecu for ? Regards Paul
-
Hi Jason, I have found an issue with the customers, bike side harness. Got it sorted, The yellow wire was damaged on the bike side harness. Thanks Paul
-
Ok, found the fix... It appears it was a network time-out. I have used a faster internet connection, 4g versus the slow adsl in the office and it worked
-
Hi, have tried uninstalling via windows control panel, rebooted the machine, downloaded setup.exe and ran it.. Interestingly it opened the software without asking for my user id or password. download of ZX10 file same error: Unauthorised access. ? G…
-
When attempting to down load I have the appropriate USB cable connected, 6 pin for Yamaha and 4 pin for the Kawasaki
-
It appears I can download Yamaha R1 files, but not the ZX10
-
Hi Jason I was trying to download the file for 2019 ZX10R EU Unrestricted when the error occur ed. It seems to be happening with all of the 2019 ZX10 R files. Tested with a few others now and the same thing ...
-
Product reports "communication error"