octavio@ftecu.com
octavio@ftecu.com
About
- Username
- octavio@ftecu.com
- Joined
- Visits
- 270
- Last Active
- Roles
- Staff User
- Posts
- 191
Comments
-
Hi, Looks like you were having some connection issue when you were trying to flash. I believe this has been resolved for you already. Regards
-
Hi, The bench flashing kits do not come with any codes. The USB comes with one free license you would need to register it to your account first and it will automatically be added. To register the USB first download the tuning suite. Then log in us…
-
No problem. An easy way to tell would probably be comparing your ECUs wiring to the pinouts they show in the file. I think just switching them may be all you need to do. I am not sure. Report back with results please. Regards
-
This is what i was mentioning. Not sure if this would help or not as I am not familiar with it. Regards
-
What is your ECU part number and what region are you from? Also could you send an image of your ECU connector wiring. I know that on some bikes, the wiring at the ECU is also changed. When they derestrict those types they have to swap the pins and f…
-
Hi, There should be no problem flashing the G10 with the G60 the Suzuki GSXR ECUs are very cross compatible. You could try the G10, however, I am not sure if that file has been fixed yet. Regards
-
That's great to hear, something must have happened during the initial ECU write. Glad that has been resolved. Regards
-
Hi, We offer ABS delete plugs on the website that should be what you are looking for. You would still need to keep your speed sensors on as they are required to send wheel speed signals to your ECU. Regards
-
I received tested a lambda controller from another person with the same issue. It tested good, Hold off on sending yours for now if you have not already. Regards
-
Hi, I believe we are the ones waiting for a e-mail reply. This answered one of our questions. How is your internet connection. Usually the bench harness is easier. I believe a full write of your ECU with the proper file should be all you need since …
-
Hi, I believe the MT07 of that year is restricted in many ways. Check your throttle cable at the throttle body to see if there is a plate there. it is used to prevent you from opening the throttle all the way. There are also restrictions in your air…
-
Hi, I am assuming you are speaking of the fuel maps? I believe you would be able to. I do not really recommend it as the maps are a bit different especially ignition. If you would like to tune it more to your set up id recommend using active tune or…
-
Is everything working fine with the 1XB-8591A-00(THI) ?
-
Hi, Apologies for the delay. What is your ECU part number and what file did you flash to your ECU? Regards
-
Hi, Apologies for the delay. What exactly are you trying to disable? Regards
-
Hi, Your licenses are in a good state and are good to flash. Regards
-
Hi, Apologies for the delay. The hard fail status is recoverable. I see you were able to flash your ECU successfully. Regards
-
No problem, glad everything is going well. Regards
-
Hi, That is interesting. Must have been a little bug or glitch in the last file. I am glad everything is functioning normally for you now. Regards
-
Hi, I do not believe any of our MT09 files have the launch control function. I am not sure if any of them came with it stock as well. Currently there are no plans as other projects are still underway. Regards
-
I would not know, we do not have an option for the speed limiter. I do know development tends to remove it on the Unrestricted files. I am not sure if that is the case for every bike though. If we could find out if it worked out for Ingram that woul…
-
I will try to send in the request. No guarantees!
-
Hi, Yes it does, one more thing. Can you enable Active Tune in that new file and reflash. I want to know if it may have been an issue with the previous file or if the Active Tune being enabled causes the Auto Blipper function to not work. Regards
-
Hi, j.nelson I believe you are currently being helped. Also for the MT07 it is the 6-Pin Harness Test. The 6-Pin label refers to the cavities in the connector for the harness. They will not all be necessarily populated. Regards
-
Hi, The unrestricted file would be a good start in regards to getting going. Nothing will really beat a good Dyno Tune, the second best option would be to run the Active Tune system, it is as close as you will get to getting a dyno tune and would be…
-
Can you please perform the 6-Pin bike side harness hardware test found on the front page of the forum and report your results back. Regards
-
Ok sounds good. I will see what we can do for you in regards to the license as we are unable to reset confirmed licenses. Also we will try to find out as soon as we can about the limiter. Regards
-
Hi, You do not need to have your bike side harness installed to register your USB. You must register the USB first in order to download the installation documents. To do so, go to the FTECU website and at the top right click Downloads. Download th…
-
Hi, What file are you using? Disable Active Tune and flash your ECU, does the Auto Blipper work as before? Are you using bone stock Auto Blip/QS setup? Regards
-
Hi, What is you ECU part number and what year VMAX are you speaking of. I can inquire with development to see if they can add the rev limiter option as well. I am not sure if they would be able to at the moment. Also I am assuming you are speaking …