gsawyer22@hotmail.com
gsawyer22@hotmail.com
About
- Username
- gsawyer22@hotmail.com
- Joined
- Visits
- 118
- Last Active
- Roles
- Verified User
- Posts
- 11
Comments
-
Thank you very much for the detailed info. I do have a couple questions, I am not able to change the values on many of the boxes and others I'm only able to adjust the values a very limited amount, am I doing something wrong? And should I not worry …
-
https://forum.ftecu.com/discussion/comment/1113#Comment_1113 From 2000rpm all the way to 14000rpm in Decel Map #1, 2 and 3
-
From 2000rpm all the way to 14000rpm in Decel Map #1, 2 and 3
-
I just want to double check with you on this setting. I have tried the ETV Decel Comp settings from -1.0 all the way to -7.79, which is the limit and I feel absolutely no difference in engine braking. If any difference at all, I feel more engine bra…
-
Does the staff at ftecu even look at these questions? How difficult is it to respond to these simple requests?
-
Can you elaborate on the stock unrestricted map breaking your bike? I've got the same bike and am now concerned about using that map. Thanks so much.
-
https://forum.ftecu.com/discussion/comment/356#Comment_356 So do you have a recommendation for settings? Thanks.
-
I had a very similar issue and although you said you have checked your connections well, I would double check the connection of the green wire to the coupler which attaches to the ecu. You may think it's fully seated, but sometimes it's actually not…
-
The values are all set to stock 0.00 currently, yes. I am trying to get less engine braking. I was going to set up my Decel Map #1, #2, and #3 in my ETV Decel Comp PWR 2. I'm not sure what the 0.00 refers to in the table. Is that 0.00 percent thrott…