English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
Swedish
calvin_79@hotmail.com
calvin_79@hotmail.com
About
- Username
- calvin_79@hotmail.com
- Joined
- Visits
- 79
- Last Active
- Roles
- Verified User
- Posts
- 13
Comments
-
Cheers Jason. Once I rode off on it I realised my speedometer stayed on 0 kmph and my quick shifter was disabled too.
-
Ok Jason, will do. Thanks
-
https://forum.ftecu.com/uploads/807/CB23YFIN9NZA.jpeg https://forum.ftecu.com/uploads/150/SMZ5DDDSVHWU.jpeg
-
https://forum.ftecu.com/uploads/581/4DLX63AS0M4A.jpeg https://forum.ftecu.com/uploads/335/4V88THOCI9LF.jpeg https://forum.ftecu.com/uploads/923/J98COFLKK351.jpeg https://forum.ftecu.com/uploads/511/7XCR1A7RM166.jpeg
-
So after all this stuffing around with a bench kit that doesn’t work Ive paid to have a qualified auto electrician check it out. He suspects the pin outs on the harness are in the wrong spot, hence why the ECU is getting no power. 😡
-
Hi Jason, I had a electrician check it for continuity and all seemed ok. I’ve tried flashing it again but still it says fail no response. Beats me? My ECU won’t connect to the ftecu program for some reason.
-
Hi Jason, I checked the power lead and it’s reading 12 volts. I’m thinking it must be the harness itself?
-
Hi Jason, when I connect the power source cable the interface numbers are 0, 10, 20, 30. Then when I disconnect the cable the numbers are the same. It’s not until I actually disconnect the ecu I get different numbers which I think are 7 and 37. Do y…
-
Hi Jason, I tried connecting it straight into the power point. I’ve tried 2 different USA to Australia power point adapters as here in Australia we have different power point sockets to America, but it’s still coming up fail to respond. The interfac…
-
Hi kento, I connected it to a extension bar with multiple outlets.
-
Mate i'm in the exact same situation as you, i've got no idea what the go is with this. I've got the same problem with my R1. Have you worked anything out since you've been getting the errors?