robertrynd@gmail.com
robertrynd@gmail.com
About
- Username
- robertrynd@gmail.com
- Joined
- Visits
- 43
- Last Active
- Roles
- Verified User
- Posts
- 18
Comments
-
No worries, thank you!
-
Hello, I sent the harness back with a note via UPS ground. It should have arrived 2 weeks ago. Any updates on this? I have not received any response back. Thanks
-
Hey, I sent the harness back via UPS ground with a note inside. Is there an email I can follow up with? Thanks
-
https://forum.ftecu.com/uploads/560/OS2YZMQOOY3R.png
-
Will do, thank you. Also, I used the pinout test. The top right pin read no voltage on the 5V pinout test. All other pins (except ground) checked good for 5V respectively during the test.
-
I performed the "pin test" on the R6 that did not have issues in the past for certainty's sake. It passed. This leads me to believe the culprit is the USB harness itself.
-
So how can I send this USB harness back for testing/replacement?
-
It flashed one time with an error. I tried to flash again and it could then it could not connect at all. I tried the testing method on the homepage testing the connections with a paperclip and it passed. I then tried to reflash my R6 (known good set…
-
Just had a custom map done by 2WDW and the same thing happened. Error on block C and not it wont connect. Can you try and reset it?
-
Wow, all I can say is thank you. I was not anticipating a quick response and having this fixed on a holiday weekend. Have a safe and happy 4th!
-
https://forum.ftecu.com/uploads/820/28BW0I0CJ7BF.png
-
Hi Jason, Thanks for the quick response. 1: Yes you could set the activation limits and anything else to exactly what you would like. When you say you have autotune disabled do you mean live correction mode? Yes, live correction mode is disabl…
-
Ended up that the yellow wire wasnt fully seating into the harness. I used a pin to push it into place. Anyway, it connected and flashed. Thanks for the support!
-
It's good. The bike is less than a year old.
-
Hi Kento, Instructions received, thanks! Everything is hooked up correctly but it is still not working. I checked all the pins are fully inserted and the harness is locked in position. It gets up to the writing prompt and says connected, then says c…