English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
Swedish
jeff_c
jeff_c
About
- Username
- jeff_c
- Joined
- Visits
- 102
- Last Active
- Roles
- Verified User
- Posts
- 13
Comments
-
If you open up the ETV Decel Maps, but don't change anything and then try to close the file or the Tuning suite, does a box come up asking if you want to save the changes? In the older versions of the Tuning Suite there were no safety limits to what…
-
So it still goes by itself at 10mph with the throttle closed? Check the ETV Decel Maps, A Mode Gear 1. The columns are RPMs and values above 100 basically keep the butterflies open slightly.
-
First, did the previous owner also give you his flashing cable, or xfer the ECU license to your acct if you're using your own? Without that, I believe you won't be able to read out the ECU. Or, if he gave you the file he used to flash and didn't r…
-
The issue is still happening, but for me it was only affecting specific columns in the ETV tables. I worked around it by making sure that any time I clicked on any cell in those columns, I had to retype the value I wanted because simply selecting…
-
I found the solution. I realized that I'd never plugged in the USB Data link cable into the computers the latest Tuning Suite wasn't working on (never had to, as I used to use the software to edit maps only and it always just worked). So I plugged…
-
Jason, yes, it's at 2.5.8.8 now, but what's odd is that I have it installed on a couple of different computers, but the application now only works correctly on 2 of them. One of them is a Windows 7 desktop and the other is a Windows 10 (2004) lapto…
-
It's now able to update to 2.5.8.6, but hangs after logging in. The main FTECU window never comes up.
-
The instructions explains it pretty well, did you not download them? The O2 sensor connects to the additional module (Lambda controller). The other connector on the Lambda controller connects to the O2 connector on the bike's harness. The extra ca…
-
I ran into the same issue (diff bike though, FZ09) trying to flash from the AFR monitor, I think it's just some kind of bug. What I do is, say 'no' to purchase a new license, then make sure to save the file. Compare to the last file you flashed to …
-
It looks like simply the act of highlighting cells and doing a copy even causes values in the source table to change! Example: say you have tables 1, 2, and 3 that you've compared and they're all identical. Open table 1, highlight cells (do all for…
-
The Type 11 bike harness gets installed on the bike, so that you do not have to remove the ECU to flash it as you would with the Type 16 bench harness. You simply connect your laptop to the Type 11 connector. 12V power comes from the battery, when …