chomorin07@yahoo.co.jp
chomorin07@yahoo.co.jp
About
- Username
- chomorin07@yahoo.co.jp
- Joined
- Visits
- 252
- Last Active
- Roles
- Verified User
- Posts
- 41
Comments
-
Thank you for your response! Now you can rewrite it safely. The FTecu data was excellent and the settings were easy to decide!
-
Order number 114864 June 3rd My friend got injured on a motorcycle and returned to work, so I finally tried to rewrite it recently. I ordered a bike harness and it arrived, so I'm planning to rewrite it here. I'm thinking about using a bench…
-
The first time I used it after purchasing it, it didn't work. If you just change the wiring, you can do it here. It looked like there was no problem with the pin position of the vehicle harness. Is this a white wire problem from the 5V power sup…
-
Bench harness BNHA22 SN: 022323 AM001 kawasaki Z400 ECU: 21175-1443(JP)
-
thank you. I will send it to you when I receive the bike.
-
Thank you for analyzing the R25ECU!
-
BS8-H591A-10 BS8-H591A-00 I have sent both, so please analyze them. The competition is about to start, so I'm planning to finish it as soon as possible.
-
I gave up because it is difficult to purchase a new genuine ECU. In Honda, the purchase of ECU is restricted.
-
Returned without being parsed internally. This type of ECU cannot be preloaded. After confirming the complete genuine ECU, can I send it again?
-
BU2-8591A-10(JP) 5-speed 9000RPM limiter 1WS-8591A-10 etc. I copied Volt-Dwel and used it, but it seems to be improved. It seems to be related to the supply voltage of each part by the battery. There are many symptoms in vehicles equipped with addit…
-
If the wiring relationship between injection and ignition is the same, there will be no problem because the engine is the same. JP EU THI has the same ECU wiring. Regarding BU2, Volt- seems to have an effect. I am trying to change this.
-
1XB-8591A-10 (JP) → 1XB-8591A-00 (THI) It is operating normally. I think it works smoothly because the fuel can be adjusted more finely.
-
1XB-8591A-10 (JP) ← Applicable car 5 speed 9000rpm After rewriting with 1XB-8591A-00 (THI), the limiter disappeared. Until the report.
-
BU2-8591A-10. License: # 86A290B3 → # ECF23379 I transferred the license to # ECF23379 and asked them to write it additionally, but the 5-speed 9000rpm did not change. I gave up because the bike will be changed. Can't reset license # 86A290B3? I…
-
It was successfully rewritten! thank you!
-
Alert: Write attempt. Please try again. Status: failed patching imagedata
-
New writing to other ECUs is possible. For some reason, I can't do only the newly registered BAT-8591A-30.
-
https://youtu.be/bluDuOhEOvE XSR700 BU2-8591A-10 (JP) This bike also has a 5-speed 9000rpm limiter. The sensor and switch were normal. The read data has been sent. We are investigating the differences between other bikes and accessories.
-
I sent the file. We are checking if there are any other bikes that have a limiter. thank you.
-
Currently, only 5th speed is a limiter at 9000rpm. 6th gear rotates up to the set 10450 rpm.
-
https://youtu.be/QJoYV9Z0eBw has passed. The 6-speed limiter disappeared when the ECU was overwritten due to a license change. 5th speed is 9000rpm and there is no change. The speed pulse was working normally. I'm also looking at other sensors.
-
https://youtu.be/aLwT0bHOzvI It does not change even if the license change is overwritten. Eventually there seems to be a problem with the bike. Even if I checked it directly, there were no errors related to the sensor. It will take a tremendous am…
-
It was a misunderstanding of the translation. After reading, if you write with the harness connected, you can overwrite with a new license! Overwritten unlimited files. The fuel and ignition timing limiters after reading were the values as written. …
-
Other ECUs cannot be used with the immobilizer. ECUs registered as immobilizers cannot even be tried without transplanting various parts such as tank caps. I tried all unlimited files and regular files. At present, it seems that there was a problem …
-
License: # 86A290B3 I would like to try overwriting this after resetting the license. thank you.
-
My bike is 1WS-8591A-10 (MT07 2014). The bikes in question are the BU2-8591A-10 (MT07 2019) and the 1WS-8591A-10. I think there was a problem with the initial rewriting. I've rewritten a lot of bikes, but only two have speed limiters.
-
Fuel cut and ignition timing cut changes are effective up to 4th gear. 5th and 6th gears stop at 8750-9000 rpm. The OBD2 display shows no abnormal values. Speed limiter? Individual rev limiter? We are unable to determine here.
-
https://youtube.com/shorts/sqZ__m-Xvtc?feature=share The data for the vehicle in question is as initially presented. I have tried changing everything, including the fuel mixture, ignition timing, and removing all OBD2 checks, with no improvement. BU…
-
https://youtube.com/shorts/UpZ5qMF2y3A?feature=share This is a video of one of the units in question. I will see this vehicle in person.
-
https://youtu.be/LkeCh2Jfarw It does not appear on my bike. See video. I got a chance to see the BU2-8591A-10 vehicle in person, so I will check the symptoms and see if the ECU can handle it. I will take a video if possible ..