JOSEPH.R.BRAIG@GMAIL.COM
JOSEPH.R.BRAIG@GMAIL.COM
About
- Username
- JOSEPH.R.BRAIG@GMAIL.COM
- Joined
- Visits
- 75
- Last Active
- Roles
- Verified User
- Posts
- 11
Comments
-
Flash success! I forgot that I had but a servo buddy on just to keep the connector from getting fouled up, apparently that was the issue. Removed the servo buddy and the flash took with no issues. Thank you for the help while we worked this out.
-
any word on if the wiring is correct for the Auto-Blipper and resetting my licenses?
-
Also License (D38E8B41) was not unlocked so I attempted with License (FEB0F413). I expect it would have been the same result either way
-
Failed again while mapping the base unrestricted map. Im wondering if the Auto-Blipper is installed correctly (2018 Yamaha MT10). https://forum.ftecu.com/uploads/894/9RMGTHGP6AZC.jpg Green wire is where I put the cable coming from the auto-blipper t…
-
Same issue. I am wondering if the ECU QSS Input needs to be enabled or disabled if I have the Auto-Blipper feature turned on when I flash the bike? If it needs to be enabled I am just going to take the Auto-Blipper off and return to stock Quickshift…
-
Forgot to mention that the Auto-Tune and Auto-Blipper modules are assigned to License D38E8B41, unless it is universal and will work with either.
-
https://forum.ftecu.com/uploads/881/AJIIYOF9XC4E.png Attempted Flash again with original license (D38E8B41). Told me that the write attempt failed. Now giving the same error as last time (no registered ECU found). Attempted with the other license th…
-
Awesome, thank you for the quick response.