English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
SwedishEcu error no responce on Yamaha R1 2019
michel.performanceracing@gmail.com
Posts: 6Verified User
in R1
HI I have a problem with a R1 2019 ecu number BX4-8591A-30 (EU °. When I want write on the ECU a message appears after few second Ecu error no responce. But the problem the bike dispay on the dash something like the Ecu doesn "t install You can found a picture of the dash with the ECu connected
Tagged:
Comments
The "Error no response" message means that you have a hardware connection problem that is preventing the software from communicating with the ECU. Are you using a bike-side harness (the harness that plugs into the ECU connector on your motorcycle)? If so, please refer to the sticky post on the homepage titled "Attention: Hardware Test for 6-Pin Bike-Side Harness..."
Hi Kent wasn’t sure where to write my problem or start a conversation but having a problem writing to my Ecu I’m using bench harness and don’t the text and everything is working but when I try to write to Ecu this happens(see photos) i have flashed my Ecu before with the same harness
My photos won’t upload but says “unauthorised access entry” and also says stays:”reporting failure”
try lan cable
I have at the moment extremely the same problem with the same ecu .. The dash appears as in the photo
Does anyone have the solution? At this time the ecu does not work even if you disconnect the harness side
Hi,
That's because you did not have a successful flash to the ECU. Please reflash the ECU.
Thanks,
Jason A.