Support Forum

2018 MT-10 auto-blipper failure, both first and replacement sensors

gparis2009@gmail.comgparis2009@gmail.com Posts: 2Verified User
in Quickshifters and Blippers

Hello,

I recently received and installed a replacement QS/AB sensor on my 2018 Yamaha MT-10. The original FTEcu setup initially worked great for about ten months before failing. My ecu was flashed by Two Wheel DynoWorks (which I've had zero problems with BTW). FTEcu sent me a replacement. I also replaced the harness. The green wire is in the correct pin position on the smaller ecu plug, and also fully seated. A test ride revealed no auto-blipper function; swapping the pair of smaller plugs disabled the QS but otherwise made no difference. Kind of out of options here...what else could be checked?

Comments

Sign In or Register to comment.