matt.ihnen@gmail.com
matt.ihnen@gmail.com
About
- Username
- matt.ihnen@gmail.com
- Joined
- Visits
- 24
- Last Active
- Roles
- Verified User
- Posts
- 8
Comments
-
I will look at it tonight and see if I can get it out and let you know if I need another one. Thanks for all of your help.
-
There is a bad/intermittent ground connection, looking into this further I see that the ground wire going into the bike side harness plug was not crimped properly into the connector pin so it was just sitting loosely in there which is why it probabl…
-
Key off: 37, key on:36
-
I assume at this point there is some problem with the connection to the ECU? Seeing as the driver it install is an FTDI driver I'm going to assume this is a UART connection to the ECU so if I check the wires I should see two lines idling high at wha…
-
Thanks for the response, its weird that you would show the (incorrect) year and region to the end user if it doesn't mean anything but okay. So I went to the bike and tried to flash it again and it now asks me if I want to marry the license to whic…
-
I can confirm this fixes the problem for me as well. Apparently you can't use a text scaling factor of anything other than 100% with this software.
-
Same issue here on my laptop running windows 10. I tried it on my desktop (also running windows 10) and it works fine. Both are running the latest version of software. As a possible workaround if you can find another computer that will work load the…