English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
Swedish
jshonblom@live.com
jshonblom@live.com
About
- Username
- jshonblom@live.com
- Joined
- Visits
- 16
- Last Active
- Roles
- Verified User
- Posts
- 6
Comments
-
This was a case of user error. I reviewed the installation steps once again and found that I had put the orange pin in six spaces from the 32 side rather than six spaces from the 17 side on the middle row. I was tunneled in on making sure the pins w…
-
I just checked the voltage of the bike side harness and have found that the Orange to GND is 5V, Yellow to GND is 5V, but the voltage of the red to GND is 0.1. This seems like the issue, I have tried to seat the Red pin further by pushing the wire d…
-
The only stock xsr700 file is a (CA) file, so I tried the 2018 MT-07 - 2RC-8591A-2-(US) - StockECU.ftm file and it also did not work. See Screenshot: https://forum.ftecu.com/uploads/162/6EGR87MTOFBB.png Thoughts?
-
My ECU Part number is 2RC-8591A-20 (2018 xsr700) Here is a screenshot of the File in the device tab the blotched out part is my name. It is a custom, secured file from 2 Wheel Dyno Works. I inquired with them on why the file reflects 2RC-8591A-00 (w…
-
Hey Kent, I used the hardware test in the software. When everything was hooked up and the key was off I got the number 30. See screenshot: https://forum.ftecu.com/uploads/489/K3CYWIK4LAXX.png When I turned on the Key and powered the ECU I received a…