Comments

• Any progress with the flash Jason?

  in 2020 R1 Flashing Comment by herbf02@gmail.com July 2021
• Hi there, any luck with the flash? Im pretty worried since i have a 2021 r1 and dont see anything for the 2020 yet...

  in 2020 R1 Flashing Comment by herbf02@gmail.com July 2021
• hi sorry for the constant pestering, i noticed the file i want to flash in the notes it says it works best with "active tune, stock air filter and pump gas" now i know i have smog block off plates so i know to disable the AIS valve, however, i do no…

  in graves 3/4 installed, which map should I upload? Comment by herbf02@gmail.com September 2019
• I see, thanks for your help

  in graves 3/4 installed, which map should I upload? Comment by herbf02@gmail.com September 2019
• thanks Jason and Kent, I got the adapter for the obd scanner and checked the codes, turns out I should of used an unrestricted file as most of the codes I had were already turned off in the diagnostic manager. hopefully no 1 goes thru what I went bu…

  in hoping check engine light would turn off with flash Comment by herbf02@gmail.com September 2019
• Hi, thanks for the quick response. I tried your suggestion and still check engine light is on. Current settings are Stock map with temperature at 195-205, AIS (disabled), and p1400 deselected. Any other suggestions?

  in hoping check engine light would turn off with flash Comment by herbf02@gmail.com August 2019