Comments

• If not able to import PC V Maps would I be able to install the PC V again and keep the perameters that I had flashed into the ECU and Run PCV fuel Maps. I'd rather not reinstall if I dont have to though.

  in Bike-Side Flashing Basics Comment by desjardin149@gmail.com September 2021
• Well I waited two days then hooked it back up to the laptop and have been able to flash it since. Don't know what went buggy. Anyways I used to have a Power Commander V installed and i ended up uninstalling it and the Auto Tuner. I would like to Ru…

  in Bike-Side Flashing Basics Comment by desjardin149@gmail.com September 2021
• well now I'm back to the 6, 16, 36 on the Hardware test so im going to pull harness and redo the plug wires i guess and then see where it goes

  in Bike-Side Flashing Basics Comment by desjardin149@gmail.com August 2021
• I'm attempting to do the hardware test and it is saying that there is an unrecognized usb device. Now since I last fashed ad read the ecu I have removed my PC V and auto tuner from the bike that should not have made a difference would it

  in Bike-Side Flashing Basics Comment by desjardin149@gmail.com August 2021
• I have flashed in the stock map and then today I tried to flaSH THE UNRESTRICTED FILE AND IT SAYS THAT THE ECU IS NOT REWGISTERED AND ASKED IF I WANT TO BUY ANOTHER LICENSE. Hell no i don't want to buy another one because my cable and laptop have ne…

  in Bike-Side Flashing Basics Comment by desjardin149@gmail.com August 2021
• Question? I just got finished installing the harness and when I went to write to the ecu it came up with write attempt failed No response so I ran the interface test and with power off I got 21 & 31 then when i turned key on it came up with 25& 35. …

  in Bike-Side Flashing Basics Comment by desjardin149@gmail.com July 2021