Support Forum

Has the auto blipper been fixed on the Canadian model

fz10fz10 Posts: 10Verified User

There are numerous reports on the fz10 forum of the auto blipper not working on the Canadian model (mine included). Has this been fixed?

Comments

  • jason@ftecu.comjason@ftecu.com Posts: 1,071Staff User

    Hi,

    I'll need some more information and pictures from you to help you.

    What is your ECU part number?

    What file part number is in your bike?

    Who flashed the ECU?

    Which Autoblip harness do you have? Can you send me a few pictures of it including a picture of the part number on the white label?

    Do you have the single sensor setup or the old school dual sensor setup?

    Does the quickshift still work fine?

    Are you running GP shift or Standard shift?

    Can you send me a few pictures of your shift linkage setup? Also pictures of where the shift sensor plugs are connected into the harness.

    Thanks,

    Jason A.

  • fz10fz10 Posts: 10Verified User
    edited March 2021

    It's this issue (posted by 2wheeldynoworks):

    "The issue has nothing to do with our mapping, as we've now replicated the same issue for another Canadian customer with completely stock mapping in place. We've contacted FTECU multiple times now about this issue. It seems specific to the Canadian serial numbers ONLY, and ONLY occurs when the Autoblipper is enabled via the FTECU software.


    It looks like the issues revolves around gear position sensor reference voltage variations from the Canadian ECU's vs the USA/EU ECU's. They're still working on a fix, last we heard.



    -2WDW

    "

  • jason@ftecu.comjason@ftecu.com Posts: 1,071Staff User

    Hi,

    I need to look into this and see if the problem still exists. In the meantime please answer my questions so I can see about helping you out.

    Thanks,

    Jason A.

  • fz10fz10 Posts: 10Verified User

    What is your ECU part number?

    B67-8591A-20(CAN) StockECU


    What file part number is in your bike?

    It’s the Canadian model


    Who flashed the ECU?

    I did with 2dynoworks mapping


    Which Autoblip harness do you have? Can you send me a few pictures of it including a picture of the part number on the white label?

    I have the Canadian Autoblip harness. I will get the number and pictures in a couple of days.


    Do you have the single sensor setup or the old school dual sensor setup?

    Single


    Does the quickshift still work fine?

    Jerky but works


    Are you running GP shift or Standard shift?

    Standard shift

  • fz10fz10 Posts: 10Verified User

    Has this been resolved?

  • jason@ftecu.comjason@ftecu.com Posts: 1,071Staff User

    Hi,

    Did you ever attach those pictures and the numbers off the cables? I did not see them here unless you emailed them directly to me? If you haven't' please email that directly to me as it's easier for me to see and reply.

    Thanks,

    Jason A.

  • fz10fz10 Posts: 10Verified User
    edited March 2021
  • fz10fz10 Posts: 10Verified User

    Has there been any progress fixing this issue?

  • mike@ftecu.commike@ftecu.com Posts: 178Staff User

    Hi,

    The fix is to measure the voltage from the gear position sensor in each gear including neutral and email the results and map image to us for adjustment. The problem is there is a lot of variance in voltage from the sensor and has to be adjusted in the map.

  • fz10fz10 Posts: 10Verified User

    Awesome, are there any pictures or videos of the wiring to show where exactly to hook the volt meter up to?

  • fz10fz10 Posts: 10Verified User
    edited August 2023

    I have sent an email with the voltage and my map to sales@ftecu.com

    voltage:

    1 - 4.23

    N - 3.88

    2 - 3.53

    3 - 2.83

    4 - 2.12

    5 - 1.42

    6 - 0.72

  • todd@ftecu.comtodd@ftecu.com Posts: 102Staff User

    Email has been received. I will add this to the R&D que.

  • fz10fz10 Posts: 10Verified User

    Due to never getting instructions on how to properly get the voltage out of the gear shifter I used a voltmeter wired to try to get the data. The values are in reverse


    I now used the ftecu software with the bike attached and got the following values in the "data file"


    THese are the correct voltage numbers:


    1 - .76

    N - 1.12

    2 - 1.47

    3 - 2.19

    4 - 2.91

    5 - 3.63

    6 - 4.35

  • todd@ftecu.comtodd@ftecu.com Posts: 102Staff User

    Thank you.

Sign In or Register to comment.