Forum wsparcia

HI temp after flash ?

vegasonic@gazeta.plvegasonic@gazeta.pl Posty: 2Verified User
edytowano January 2021 w GSXR 750

GSXR -750_2009 EU, after flash I have red light and HI temp. on dashboard :( ... When i read values from OBD ( TEXA ) i have normal values of temperature .. after 95 C fan turns ON ... erything is OK, but not on dashboard .. any help ?

In bike wire harness in slots 15&16 I have pins ... slot 29 is empty ...

Komentarze

  • jason@ftecu.comjason@ftecu.com Posty: 1,071Staff User

    Cześć, nie widzę żadnej niedawnej historii flashowania na Twoim koncie. Czy użyłeś innego konta do flashowania tego ECU? Dzięki, Jason A.

  • vegasonic@gazeta.plvegasonic@gazeta.pl Posty: 2Verified User

    Yes .. I have 2 intrefaces ;)

    Account : kawasakifte@gmail.com

  • jason@ftecu.comjason@ftecu.com Posty: 1,071Staff User

    Cześć, zresetowałem twoją licencję, spróbuj flashować z plikiem stock i zobacz, czy to coś dla ciebie zmieni. Dzięki, Jason A.

  • kawasakifte@gmail.comkawasakifte@gmail.com Posty: 10Verified User
    edytowano January 2021

    THX :) !!!

    I upload stock soft right now .. everything is OK ..

    So ... You advice reflash again unrestricted software ? :)


    EDIT:

    I upload STOCK with some change ( FUEL, STP and IGN from unrestricted + decel off ) and I have HI TEMP :( .... I try many combinations with STOCK and stil HI TEMP :/

  • kawasakifte@gmail.comkawasakifte@gmail.com Posty: 10Verified User

    I try many, many times and :


       When I reflash with STOCK -- everything is OK ( I have PAIR fault because I remove it )

       When I reflash with Unrestricted I have >>> HI TEMP

       When I reflash with STOCK + (only) disebled decel ( TRUE ) - everything is OK

        When I reflash with STOCK + IGN or some other changes i have : HI TEMP

       When I reflash with UNRESTRICTED soft with for example only "disabled decel" ( TRUE ) ->>> HI TEMP ...


    Soo ..... I dont have any other ideas .. I reflash STOCK and leave it :( ...


    You can check what is wrong ?

Zaloguj się lub Zarejestruj, aby skomentować.