R-Mode features

Comments

• jason@ftecu.com Posts: 1,071Staff User

  October 2019

  Hi,

  It enables any of the features the R model has compared to the standard model. This includes Quickshift, Autoblip, and Launch Control.

  Thanks,

  Jason A.
• jamesmatthew2011@gmail.com Posts: 6Verified User

  October 2019

  How do you activate the Launch Control on a flashed non-r model gsxr1000 17+? I know on the R-model you hold the start button for 1-2 seconds and the dash goes to L L, but on the non-r model after flash, I believe there is a different way correct? like pulling in the clutch 3 times or something? I did it last year can't remember how to enable it.
• jason@ftecu.com Posts: 1,071Staff User

  October 2019

  Hi,

  To my knowledge it should still be the same as the stock R model.

  Thanks,

  Jason A.
• wayne@vtconline.co.nz Posts: 2Verified User

  May 2020

  Yes it's the same

  Regards,

  Wayne
• SMFreak Posts: 18Verified User

  July 2020

  On 32920-17KG2 (EU) which comes for 2020 GSXR 1000 with QS/AB stock enabled after enabling RR Features i see on dash QS is active but cannot activate LC by simple start button press for 2sec once byke is idling as on RR model.

  Not sure where the issue may be?
• kento_ftecu Posts: 776Staff User

  July 2020

  The LC Activation procedure is listed in the QS Launch Control Pit Limiter feature box in the file.

  1. Idle in neutral while stopped.
  2. Actuate clutch lever at least three times.
  3. Proceed to first gear (LCS now active).
• SMFreak Posts: 18Verified User

  July 2020

  @kento_ftecu

  Have seen this but didnt touch anything within ECU Modules nor Pit Limiter, just enabled R features primarily to keep OEM QS function.

  Anyways will check on the bike how it works after enabling it that way.

  Thanks