Support Forum

kawasaki h2

dilou83200@hotmail.frdilou83200@hotmail.fr Posts: 8Verified User

hello so here is as agreed I will send an email on 12/10/2019 and we are on 12/16/2019 and to date I still have no response from you.


Comments

  • dilou83200@hotmail.frdilou83200@hotmail.fr Posts: 8Verified User
  • dilou83200@hotmail.frdilou83200@hotmail.fr Posts: 8Verified User

    watch well because its proves that the problem comes from you thank you for the settled

  • kento_ftecukento_ftecu Posts: 776Staff User

    Click yes.

  • dilou83200@hotmail.frdilou83200@hotmail.fr Posts: 8Verified User

    this error message is no longer displayed, I have that of the first photo which is displayed all the time now

  • kento_ftecukento_ftecu Posts: 776Staff User
    edited December 2019

    You have a hardware connection issue, no initial response means the ECU is not communicating back to the software. Please check harness wiring.

  • kento_ftecukento_ftecu Posts: 776Staff User

    Also, if using bench harness, look at the face of the connector carefully to see that all four wire pins are pushed in all the way forward.

  • dilou83200@hotmail.frdilou83200@hotmail.fr Posts: 8Verified User

    I have already checked everything, do you really think that I will re-assemble the whole bike to re-check what you tell me? you take me for an imbecile? it comes from you and not from my motorbike and from the wiring because I didn't touch anything and I had this problem overnight. arrived at a time must say stop, you have won I drop your poor quality material. as soon as possible I send you back the autobliper for the warranty and the license you owed me, I will see later, I do not thank you and like many people (seller) you are the first to sell equipment and when this equipment has a problem you don't assume behind.

  • dilou83200@hotmail.frdilou83200@hotmail.fr Posts: 8Verified User

    how do you want the initialization of my ecu to be done when my license is not recognized? I must be stupid? illiterate? to not understand?

  • kento_ftecukento_ftecu Posts: 776Staff User

    As I was saying before, you lack the patience in your replies to allow us to help you troubleshoot your issues, and you refuse to listen to suggestions to help.

  • kento_ftecukento_ftecu Posts: 776Staff User

    The reason your license is not recognized is because you have a hardware issue that is preventing correct communication to the software from your ECU. This is why I have been saying from the beginning that you need to check your hardware CAREFULLY. Even if you "haven't touched it since" whenever...

This discussion has been closed.