Support Forum

Attention: Using OBD harness, must connect to the CORRECT OBD connector

kento_ftecukento_ftecu Posts: 637Staff User
edited November 2019 in Z 900

For those of you Z900/RS/RS Cafe owners who have purchased one of our OBDII harness adaptors, you need to make sure that you connect to the proper connector on the bike. The Kawasaki Z900/RS/RS Cafe has two OBD-style connectors; the one on the right side (the side with the rear brake pedal) is for the ABS diagnostics port (see 21 in the diagram below). The one on the left side (shift lever side) is the proper ECU diagnostics connector you need to connect to (see 16 in the diagram below). It should have six wires leading into it (the ABS connector only has four wires).

Sign In or Register to comment.