English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
SwedishMT09 bench harness issue
dlhindustry@gmail.com
Posts: 7Verified User
in FZ / MT 09
I got issue when reflash it with bench harness, after finshing the job, software issued: ECU imaged invalid, but ECU still work well without fault code or issue.
I tried many times, but same issue. The ecu p/n is same as download file.
Regards
Comments
What is the file number and your ECU number?
Did you make any changes to the file you were trying to flash? The software is not letting you flash that file because there is a mismatch with your ECU.
It is 2BS-85910A-00, correct file.
The file is from Ftecu, I did not change it anything out of your software.
Today, I worked with Suzuki 32920-01H10, same issue
In checking your flash history log, it appears you have a hardware issue that is causing the flash to fail. The reason the ECUs continue to work is because the flash was never performed. Please check your harnesses with a continuity tester.
I checked the harnesses and interface, it still work well, so how??
The "Invalid ECU Image" error message is basically saying that there is something wrong with the file you are trying to flash into the ECU. Whether the file is corrupted somehow in your process between retrieving it from the File Manager and attempting to flash it into the ECU (the file in the database is not corrupted, as there are hundreds, if not thousands, of successful flashes of that file without any issues reported from other users) or you or someone else is making changes to the file before flashing, the basic problem is that there is something wrong with the file, so the flash is never completed.
In looking over your flash history, you have many error messages related to hardware or file mismatch/corruption issues on many different bikes. This indicates that there is a definite problem in your flash hardware system, including perhaps the computer you are using.