支持论坛

闪光后检查发动机灯 3A

zzy7164@hotmail.comzzy7164@hotmail.com 帖子:3Verified User

嗨:我有一辆 2020 Ninja 400,带有完整的 Akrapovic 排气系统并且 ABS 已移除。 ECU 编号为 21175-1332。最初,我使用无限制的 2020rev 1332 ECU 映射进行第一次闪烁,并且在没有任何检查引擎灯的情况下运行良好。但是,我注意到当我在 5000-6000 RPM 之间减速时,摩托车开始爆裂和回火。我即将进行路试,所以我决定切换回库存地图。从 Flash Tune 的公共文件部分闪现股票地图后,我收到了代码为 3A 的检查引擎灯。我想知道是否有人遇到过同样的问题并且知道如何解决它。另外,有谁知道如何处理疯狂的弹出和适得其反?

评论

  • zzy7164@hotmail.comzzy7164@hotmail.com 帖子:3Verified User

    Hi:

    I have a 2020 Ninja 400 with a full Akrapovic exhaust system and the ABS removed. The ECU number is 21175-1332.

    Initially, I used the unrestricted 2020rev 1332 ECU map for my first time flashing, and it worked well without any check engine light. However, I noticed that when I decelerated between 5000-6000 RPM, the motorcycle started popping and backfiring. I have a road test coming up so I decided to switch back to the stock map. After flashing the stock map from the public file section in Flash Tune, I received a check engine light with code 3A.

    I am wondering if anyone has encountered the same problem and knows how to fix it.

    Also, does anyone knows how to deal with crazy popping and backfiring?

    只需更正一些信息。当我滚下油门时,我得到了疯狂的爆裂声和余火(射出蓝色火焰)

  • mike@ftecu.commike@ftecu.com 帖子:178Staff User

    Just correct some info. I got crazy popping and afterfire (shoot blue flame) when I roll off the throttle

    您好,您可能需要来自好的测功机调谐器的自定义地图。我们确实有该 ECU 的更新地图,我相信您可以尝试使用调优套件。减速爆裂声是由于空气喷射系统未被阻塞时引起的。

  • zzy7164@hotmail.comzzy7164@hotmail.com 帖子:3Verified User

    Hello

    You may need a custom map from a good dyno tuner. We do have an updated map for that ECU I believe in the tuning suite that you could try. The decel popping is cause from the air injection system when not blocked off.

    @mike@ftecu.com 你能告诉我地图的名字吗?我也导入power command V的full ak system fuel map看看能不能减少蓝焰

登录注册以发表评论。