Support Forum

No Registered license

britsracingteam@gmail.combritsracingteam@gmail.com Posts: 5Verified User
in R1

Hi


When i try write it says no registered license could you reallocated my license thanks

Comments

  • kento_ftecukento_ftecu Posts: 714Staff User

    Your license is still in good usable status. Are you using a bike-side or bench flash kit?

  • britsracingteam@gmail.combritsracingteam@gmail.com Posts: 5Verified User

    Bench flash kit

  • kento_ftecukento_ftecu Posts: 714Staff User

    Go to Help>Test Interface and check the "Test Inputs" box. With no power to the ECU, what number do you see in the parentheses? (do not worry about the colored dots). And with power on, what number is in the parentheses?

  • britsracingteam@gmail.combritsracingteam@gmail.com Posts: 5Verified User

    HI

    heres the numbers without power to ecu

    0

    20

    30

  • jason@ftecu.comjason@ftecu.com Posts: 1,067Staff User
    britsracingteam@gmail.combritsracingteam@gmail.com

    HI

    heres the numbers without power to ecu

    0

    20

    30

    Hi,

    What are the numbers with power on?

    Thanks,

    Jason A.

  • britsracingteam@gmail.combritsracingteam@gmail.com Posts: 5Verified User

    The same numbers

  • jason@ftecu.comjason@ftecu.com Posts: 1,067Staff User

    Hi,

    So you see no difference with power off and power on. That is not good, as it means the software never sees your ECU being powered on through the harness. Check your Red wire connection and make sure the pin is in the right location and fully seated in the ECU connector.

    Thanks,

    Jason A.

Sign In or Register to comment.