No Registered license

Comments

• kento_ftecu Posts: 776Staff User

  May 2021

  Your license is still in good usable status. Are you using a bike-side or bench flash kit?
• britsracingteam@gmail.com Posts: 5Verified User

  May 2021

  Bench flash kit
• kento_ftecu Posts: 776Staff User

  May 2021

  Go to Help>Test Interface and check the "Test Inputs" box. With no power to the ECU, what number do you see in the parentheses? (do not worry about the colored dots). And with power on, what number is in the parentheses?
• britsracingteam@gmail.com Posts: 5Verified User

  May 2021

  HI

  heres the numbers without power to ecu

  0

  20

  30
• jason@ftecu.com Posts: 1,071Staff User

  June 2021

  https://forum.ftecu.com/discussion/comment/4041#Comment_4041

  Hi,

  What are the numbers with power on?

  Thanks,

  Jason A.
• britsracingteam@gmail.com Posts: 5Verified User

  June 2021

  The same numbers
• jason@ftecu.com Posts: 1,071Staff User

  June 2021

  Hi,

  So you see no difference with power off and power on. That is not good, as it means the software never sees your ECU being powered on through the harness. Check your Red wire connection and make sure the pin is in the right location and fully seated in the ECU connector.

  Thanks,

  Jason A.