Support Forum

FZ/MT07 Error no response using bike-side

kento_ftecukento_ftecu Posts: 776Staff User
in FZ / MT 07

The most common issue we run into with this particular model is the ground wire. The majority of customers that installed their harness following the YouTube video from "Jake the Garden Snake" have the ground eyelet going to a radiator mount. The problem is that the radiator mount usually has a rubber grommet between the mount and the frame that prevents achieving a good ground. If this was the same way you installed your harness, we highly recommend installing the ground eyelet to the fuel tank mount.

Tagged:

Comments

  • Stephane@live.nlStephane@live.nl Posts: 1Verified User

    Hi Kento,

    I have this issue with my new FTecu harness.

    I connected it like described in the manual to the ECU, the ECU label is 1XB-8591A-00.

    When it is hooked up to a computer, and I turn the ignition on, it says ERR, blinking HI and the key light is blinking.

    How could I fix this?

  • kento_ftecukento_ftecu Posts: 776Staff User

    Have you flashed the ECU yet?

Sign In or Register to comment.