English
Arabic
Chinese
Dutch
Finnish
French
German
Hebrew
Hindi
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
SwedishYamaha Auto-Blipper Clutchless Downshifting Activation License
tallerlz520@yahoo.com.ar
Posts: 40Verified User
in R1
hi,
activation license send by email?
Comments
No, you have to order it through your account on our site, and then it gets applied to your account.
paid, I need autobliper code
I need to activate autobliper
The Auto-Blip feature has been added to your account. Please note that it will be assigned to the first license that you activate the file feature on when it is flashed. You will see a warning pop-up stating that the feature requires special authorization, but that is a standard message whenever the Auto-Blip feature is enabled on a file.
quick shifter yes
autobliper does not work
error code P1400
the red /brown wire disconnected?
That error code is for your AIS. If you have a full exhaust system and have disconnected the AIS, you need to go to your Diagnostics Code Manager and uncheck the box associated with error code.
Make sure that the auto-blip harness connector that has the extra wire running to the ECU connector (that is your auto-blip connector) is in the position that is activated when you downshift. If your gearshift linkage pushes on the sensor when you downshift, make sure that connector is connected to the sensor wire lead for push.
Also, you can check your sensor function following this video test: https://www.youtube.com/watch?v=QgrdBm-EjCo
NO BLIPER
CODE P062F
Please go to the Diagnostics Code Manager in your file and uncheck the box associated with that error code.
Did you check the connectors and the sensor?
bliper does not work
codes ok
sensor ok
quickshifter ok
What were the readings you got from the multitester for the sensor?
Did you enable the Auto-Blip feature on the file and flash that into the ECU?
What about the sensor connectors, did you check that your Auto-Blip connector from the harness is leading to the correct connector from the sensor?
Impossible to write
“Status: Fail: Invalid ECU image”???
I'm 9 hours ago with this problem
That means you are trying to write in the wrong file.
What is your ECU part number? And which file are you using?
File BX4-8591A-00 ecu: idem
I managed to write but bliper doesn't work
Here is Eastern time, tomorrow I follow you
We need the ECU part number please.
You may have also changed something on the file that doesn't work with what modifications have been done to the motorcycle.
Harness R1 2015/2016 vs harness R1 2017
Is the diagram the same?
Is it only different from the ecu terminal?
BX4-8591A-00
112600-5051
TBDFZ A
Hi,
The autoblip harness for the 15-16 R1 is different than the 17 R1. What autoblip harness do you have?
Thanks,
Jason A.
My bike was 2015 now it is 2017 I use the cable 2015
missing voltage on pin 12 ecu
that's the problem
I need to modify the cable
The 2017 cable is for sale?
These are the details that we need to know right from the start. It helps to avoid wasting time asking questions trying to narrow down problem areas.
Yes, the auto-blip harness for the 2017 R1 is available. Go to the 2015-2017 R1 page, and when you click on the Auto-Blip kit page, the drop-down menu shows a kit for the 2017 R1 with stock harness.
Harnes alone is not available
It was not my intention to complicate
you should sell the harness separately
Thanks and sorry
pd: I lost $ 200
We can create an invoice to buy an auto-blip harness separately if you have an account with us.
Yes, I have an account
How do I buy the harness?
We will create an invoice, and then you will receive an email with a link so that you can pay for it via your account on ftecu.com. It will be sent out shortly.