CEL on for AIS with any map

itsage818@gmail.com

I have a 20 MT-09 with full graves system and block off plates. I’ve tried a few different maps but am unable to get rid of the code for the air injection system. Ecu part number BS2-8591A-10 matched with corresponding Graves map. Do I need to jumper the connector for the AIS? Already verified the box is unchecked in the diagnostic code manager for the “P1400 exhaust air injection system malfunction”. Am fairly new to the software and tuning in general. Any help is much appreciated.

jason@ftecu.com

Hi,

As long as the P1400 code is unchecked it shouldn't show you the code on the dash. Did you bike side flash or bench flash this ECU? Have you tried flashing it with an Unrestricted image? If the Unrestricted image doesn't solve your problem try grounding the Brown/Red wire in pin 12 on the square ECU connector and see if that gets rid of the light. Let me know if your Brown/Red wire isn't in pin 12.

Thanks,

Jason A.