Support Forum

How do I know which plug is up shift and down shift for the auto blipper?

steveschurman@gmail.comsteveschurman@gmail.com Posts: 7Verified User
in FZ / MT 10

I'm trying to use gp shifting for my FZ-10 and I'm not sure which cable to plug in to which plugin. It's a 50/50 if I risk it but I don't want to ruin my bike. Is there any way to tell which one is which ( i.e. wire colors).

Comments

  • kento_ftecukento_ftecu Posts: 776Staff User

    The leads coming out of the shift sensor are Red/Green (Push) and Black/Green (Pull). The lead in the Auto-Blip harness with the Green wire that goes to the ECU connector is your Auto-Blip lead.

  • fz10fz10 Posts: 10Verified User
    edited April 2023
    https://forum.ftecu.com/discussion/comment/2565#Comment_2565

    Just to confirm, on the bike side there's a red/blue and red/green connectors. I am running a regular shift setup.

    red/green (bike) and red/green (sensor) go together

    red/blue( bike) and black/green (sensor) go together

    Is this correct?

Sign In or Register to comment.