Support Forum

2021 R3 Monster: The fuel pump continues to prime when the ignition is in the ON position.

carlos@valdesuso.uscarlos@valdesuso.us Posts: 2Verified User
in Software

ECU: B02-H591A-10

15-17 R3 - B02-H591A-10(Generic) Unrestricted.ftm

Hello everyone,

Has anyone experienced an issue where the fuel pump continues to prime while the key is in the ON position with the B02-H591A-10?

When I switch to my buddy's ECU, which is tuned by Norton (2MS-H591A-01), it works correctly.

Tagged:

Comments

  • cody@ftecu.comcody@ftecu.com Posts: 18Staff User

    Hello.

    If you're using a bike side harness please make sure to follow this thread for the R3s

    R3 NOT STARTING AFTER FLASH

    cody@ftecu.comcody@ftecu.com

    There is a small quirk with flashing R3s with a bike side harness.

    After you flash the ECU, the R3 ECU need to be completely disconnected from any power source.

    For some reason after a flash the R3 ECU's go into a stasis mode and do not allow the bike to start.

    Disconnecting the battery/power from the ECU for approx 30sec will solve this issue.


  • carlos@valdesuso.uscarlos@valdesuso.us Posts: 2Verified User

    Hi Cody,

    I used the bench kit and reflashed it a couple of times to rule out any corrupted file issues, but I’m still getting the same results.

Sign In or Register to comment.