Support Forum

Quick shifter/auto blip 2019 R6

Environmentalengineervt@gmail.comEnvironmentalengineervt@gmail.com Posts: 10Verified User
edited April 2022 in R6

I purchased last year a quick shift auto blip, it has worked fine until today. The quick shifting for going up a gear is now not working, but shifting down for auto blipping continues to work, please help. 2019 R6 I have checked wires

Comments

  • I have checked the wires and the pin to the harness, everything is fine and as it should be.

  • octavio@ftecu.comoctavio@ftecu.com Posts: 191Staff User

    Hi,

    Have you performed a continuity test across the sensor on the QS side?

    Please contact me directly with results if possible.

    Regards,

    Octavio

  • foqua24@yahoo.comfoqua24@yahoo.com Posts: 2Verified User

    have the same issue. Have you fixed this?

  • yes, i had to purchase a new quick shifter and auto blip

  • mike@ftecu.commike@ftecu.com Posts: 178Staff User

    The sensor have a 2 year warranty. If you are having a problem you should test the sensor for continuity at both plugs. To check for continuity you would insert 2 pieces of safety wire in one of the plugs and connect a multimeter to them set on continuity and move the shifter in that direction of the sensor. Then repeat on the other plug for the opposite direction. If there is no continuity for either direction you should send it in for us to test and replace if found bad.

    Thanks

    Mike Pond

Sign In or Register to comment.