第一次闪现：“错误无响应”

kento_ftecu · 2019-07-03 23:38:07

When flashing with either Bench or Bikeside setups, it is very important that you follow all steps carefully, and wait for the prompts for each step. For example, if you try to connect/disconnect the ECU flashing harness before prompted, you will trigger an error code. Note also that you are only disconnecting and…

kento_ftecu 帖子：776Staff User

July 2019 在 Bench Flashing Kits

当使用Bench或Bikeside设置进行闪烁时，请仔细按照所有步骤进行闪烁，并等待每个步骤的提示。例如，如果在提示之前尝试连接/断开ECU闪烁线束，则会触发错误代码。另请注意，您只能断开并重新连接Bench Flashing Harness和ECU。在写入过程中Do not disconnect from the Data-Link USB or wall mounted power supply。

登录或注册以发表评论。