Support Forum

R1M autoblip

rod@misanomotoimports.comrod@misanomotoimports.com Posts: 5Verified User
in R1

I have fitted an auto blip kit to my 2017 R1M but I can't get it to function. I put the green wire from the QSS sensor in pin 12 and grounded the Brown/Red wire. The blipper switch is working correctly and in the correct orientation

The license has been enabled and the map uploaded correctly. Grounding of Brown/Red wire caused error

P1400 so I unchecked the box. What have I overlooked. How can I find the parameters for the auto blipper?

Rodney.

Tagged:

Comments

  • kento_ftecukento_ftecu Posts: 776Staff User

    Do you have the AIS block off plates installed and pump removed on your bike?

    Does your quickshift work? Or neither works?

  • rod@misanomotoimports.comrod@misanomotoimports.com Posts: 5Verified User

    Hello

    AIS system is still place. I can remove it if necessary. The quickshift is working

  • rod@misanomotoimports.comrod@misanomotoimports.com Posts: 5Verified User

    Can I get some help with this problem?

  • kento_ftecukento_ftecu Posts: 776Staff User

    Did you flash your ECU or did a shop do it? You need to make sure that the AB feature has been enabled.

    There are no adjustable parameters with the Auto-Blip.

  • rod@misanomotoimports.comrod@misanomotoimports.com Posts: 5Verified User

    I did it myself. I believe I enabled it correctly I will check again and send you a screen shot.

Sign In or Register to comment.